• BIRTON-SEAL
DESCRIPTION:

Transparent liquid comprised of a solution of silicone resin in a solvent

 

CHARACTERISTICS:

To waterproof exterior walls. Will allow trapped moisture to escape from the structure as water vapor but will effectively prevent water being absorb from the surface. Does not alter colour or the surface texture

 

CONSISTENCY AND METHOD OF APPLICATION:

Liquid Brush/low atomized spray

 

WEIGHT PER 1 US.GALLON:

3.0 kilograms

 

VOLUME SOLIDS :

-

 

THEORETICAL SPREADING RATE :

-

 

PRACTICAL SPREADING RATE :

Very dependent upon the nature of the substrate but will be in the region of 8-24 square metres per 1 US.gallon

 

WET FILM THICKNESS (RANGE):

-

 

DRY FILM THICKNESS (RANGE):

-

 

FULL APPLICATION INSTRUCTIONS:

As supplied. Apply heavily, flooding surface to cause "run down" about 12" (300 mm.). If applied by spray use minimum pressure to prevent atomization

DRYING TIME (at 25 C.)  

SURFACE DRY

1 hour.

HARD DRY

-

OVERCOATING

16 hours
CLEANING SOLVENT: (OR THINNERS)

BIRTON-SOL#600

 

COLOUR:

Clear liquid

 

NOTE: Should not be used on wood, canvas or fabrics. A mask should be worn as concentration of the solvent on prolonged use, if inhaled may cause dizziness or sickness
   
Copyright 2008, STARTEX (THAILAND) CO., LTD. All Rights Reserved.