• BIRTON-COAT, EXTERIOR
DESCRIPTION:

Applied to uneven and small crack of outdoor wall or ceiling areas such as cement render, gypsum board, concrete, etc. to obtain a level blemish free surface, suitable for overcoating with all conventional decorative coatings.

 

CHARACTERISTICS:

A top quality water based high solids structured paste. High durability, shrink and crack resistant product which will level out imperfections in wall areas, and enhance the appearance of any decorative system with which it is coated.

  • White high solids paste
  • Creamy appearance
  • Acrylic Polymer as a binder
  • Good adhesion
  • Formulated to be used for indoor applications
  • Ready to use
  • Easy to rub down
METHOD OF USE:
  • Surface must be clean and dry; free from loose materials, oil and grease
  • In case of powdery surfaces apply 1 coat of BIRTON-Prime
  • No water needed for dilution
  • Apply 1 coat of BIRTON-COAT by trowel or scraper and level the surface
  • Dry thickness should not exceed 2 mm./coat
  • If one coat is not sufficient, apply the second coat on the necessary area
  • Sand and dust-off when the product is dried
  • Allow surface to dry overnight before applying emulsion paints
CONSUMPTION:

6-8 square metres per 1 tin (5 kgs.)

 

DRY THICKNESS:

Not exceed 2 mm./coat

 

CLEANING:

Equipments and tool should be cleaned with water after use

 

PACKING:

5 kilograms/plastic tin

25 kilograms/pail

 

STORAGE:

12 months in a cool and dry place in its original packing

 

Copyright 2008, STARTEX (THAILAND) CO., LTD. All Rights Reserved.