• BIRTON-BRIDGE X
DESCRIPTION:

A special acrylic polymer designed as a bridge over a crack in a masonry surface. It is able to accommodate movement in the substrate and bridge both existing cracks and cracks that can appear after applications. Suitable for overcoating with all water-based decorative coatings.

 

CHARACTERISTICS:

Permanent elasticity and elongation overcome microcracks (hairline cracks) up to 0.20 mm. cracks

  • Water-based product
  • White and creamy appearance
  • Minimum alter surface texture
  • Good adhesion
  • Formulated to be used for outdoors and indoors applications
  • Cracks more than 2.0 mm. should be repaired with BIRTON-COAT, Exterior or BIRTON-MIX, Putty then coated with BIRTON-BRIDGE X
METHOD OF USE:
  • Surface must be clean and dry; free from loose materials, oil and grease
  • In case of powdery surfaces apply 1 coat of BIRTON-PRIME
  • Thinned with cleaned water 5-10% by volume
  • Apply 1 thick coat of BIRTON-BRIDGE X by roller or brush
  • Try to keep the dry film thickness 200-250 microns
  • Allow BIRTON-BRIDGE X to dry at least 3 hours before applying emulsion paint
CONSUMPTION:

7-10 square metres per 1 tin (4 kgs.)

 

DRY THICKNESS:

200-250 microns

 

CLEANING:

Equipments and tool should be cleaned with water after use

 

PACKING:

4 kilograms/plastic tin

20 kilograms/pail

 

STORAGE:

12 months in a cool and dry place in its original packing

 

Copyright 2008, STARTEX (THAILAND) CO., LTD. All Rights Reserved.